TitanoxCrimp nuts for very thin sheet metal
Crimp nuts : a solution for very thin sheet metal
Crimp nuts are specifically recommended to provide a strong internal thread in very thin sheet metal, from 0.64mm thick, and can be installed up to 50% closer to the edge of the sheet than a standard nut.
The assembly is durable, with deformation of the sheet, not the insert. The fastener is reliable and resistant to tearing, mechanical stress and vibration. Depending on the nature and dimensions of both the insert and the support.
Quick and easy installation
Installation is particularly quick and easy in punched or drilled holes, helping to optimize productivity. Simply apply pressure to crimp the skirt completely into the sheet metal. This can be done using a crimping press, such as Titanox’s T60 and T90 models.
It’s important to note that the length of the skirt must be less than the thickness of the sheet metal, to ensure optimum hold and avoid deformation of the insert.
Another advantage: once the nut has been installed on one side, the opposite side remains smooth.
Crimp fasteners are available in sizes M2.5 to M3.5 and in stainless steel.
A wide range of applications
Crimp nuts are ideal for fine sheet metal subcontractors, stampers and metal component manufacturers. Crimp fasteners can be used for a wide range of applications in virtually all industries. These include the medical, electronics and aerospace industries.
All technical information on crimping nuts for very thin sheet metal is available in the Titanox crimping catalog, which can be downloaded from the site.
For further information or questions specific to your project, our experts are at your disposal.
Crimp nuts for very thin sheet metal are particularly quick and easy to install in perforated or drilled holes, maximizing productivity. All you have to do is apply pressure, and the skirt is completely inserted into the sheet metal. This operation can be performed using a crimping press, such as TITANOX’s T60 and T90 models.
It’s important to note that the length of the skirt must be less than the thickness of the sheet metal, to ensure optimum hold and avoid deformation of the insert.
Another advantage: once the nut has been installed on one side, the opposite side remains smooth.
Crimp fasteners are available in sizes M2.5 to M3.5 and in stainless inox.
All technical information on these crimping nuts can be found in the TITANOX crimping catalog, which can be downloaded from our website.
For more information, or for questions specific to your project, our experts are at your service.
Crimp nuts are specially recommended for providing a strong internal thread in very thin sheet metal, from 0.64 mm thick, and can be installed up to 50% closer to the edge of the sheet than a standard nut.
The assembly is durable, with no deformation of the sheet, not of the insert. The fastener is reliable and resistant to tearing, mechanical stress and vibration, depending on the nature and dimensions of both the insert and the support.
Ideal for very thin sheets and close to the edge of the sheet.
These products might interest you
RIVELITStandard blind rivet
